 |
|
|
|
|
|
 |
|||||
|
How you can make Hot Foiling
Printing Plates quickly and at a fraction of costs getting it done out! Platemaking by processing only with water and it's quick and easy in-house plate making. The Polydiam PPM/H photopolymer plate has a variety of advantages which metal plates do not
have. Main Features for Foil Stamping: * Superior heat resistance of 180(C) It has materialized the heat resistance up to a maximum of 180C. It has cleared the problem related to heat at the time of pressure in the ordinary stamping. * Holding of hardness equivalent to metal plates. This is as a result of employing a hard type material in its polymer layer, which is the base of it. * Platemaking process is extremely simple. It is the same process as other photopolymer plates so no special additional equipment is required. * No pollution because it can be processed only with water. The PPM/H plate is an aqueous product and it can be processed for plate making only with water. No chemicals are required. * It has materialized transfer of clear foil stamping. Different from the transfer of foil stamping with a metal plate because there is no conveyance of unnecessary heat on the contact surface with a foil if PPM/H plate is used, it can clearly reproduce spaces between letters and the like. * It shows excellent economical characteristics and work performance. It can give various advantages in the material cost, process time, processing with water, in house plate making, etc. therefore, it is extremely superior to metal plates with respect to the cost and work performance. PROCESSES FOR PLATEMAKING:
|
|||||
|
This complete website is © 2004.
Polydiam Industries Ltd. Polydiam reserves the right to improve or modify any specifications at any time without prior notice. |
|||||